High Quality Grouting Pump for China Coal

chinacoal11
http://www.chinacoalintl.com/
http://m.chinacoalintl.com/
http://china-machinary.com/
we provide service of enterprise's customs declaration, inspection.

Application:

1.in constructional engineering, used to pump slurry

2.in metallurgical steel department, used to maintenance blast furnace and other equipment.

3.in defense engineering, civil air defence works and mining, tunnel construction for grouting.

4.In the chemical branch of slurry used to transport of raw materials (paste, coating), magnetic materials and other media.

5.In irrigation and water conservancy project, used for reinforcing the dam. The sand for reinforcement well drilling shaft, etc.

6.In the railway construction, used for Bridges, tunnels of the grouting reinforcement.

7.Grouting in the pre-stressed beam in engineering.

Model	ZMB3	2ZMB6
Delivery capability	3m3/h	6m3/h
Delivery height	40m	40m
Horizontal delivery distance	150m	150m
Rotating Speed of Motor	1440(rpm)	1440(rpm)
Mortar Inlet Pipe	64mm	64mm
Working Pressure	1.5MPa	1.5MPa
Times of two-way movement of piston	150times/min	150times/min
Motor power	4kw	5.5kw
Mortar Outlet Pipe	51mm	51mm
Total Weight	250kg	280kg
Dimensions:L*W*H	1033*474*940mm	1592*480*940mm

GW model bar bending machine

chinacoal11
http://www.chinacoalintl.com/
http://m.chinacoalintl.com/
http://china-machinary.com/
we provide service of enterprise's customs declaration, inspection.1.Angle bending machine adopt thicken top plate and high ridigity disk of iron for durable quality.

2.International standard cooper motor with utra-high hardness accessory and fender.

3.Steel wire bender equiped with stop switch device when machine is fault can stop the power immediately.

4.Advanced design,reliable quality compact structure and stable performance

5.Closed trasimission box with low noise equipped with high speed national standard motor.

Feature:

1. Adopt 10mm thicken top plate and high rigidity disk of iron, more durable.

2. Equipped with international standard copper motor.

3. Equipped with ultra-high hardness accessory and adjustable fender.

4. Equipped with stop switch, the machine can stop immediately,ensure the safety of the workers.

5. Adopt 16mm thick top plate,high rigidity disk,adjustable stylobate,the bending angle of more efficient.

6.Equipped with international standard copper wire brake motor,narrowing inertance when the machine stops and bending angle is more accurate.

7. Pin-type positioning disk,it can adjust angle from 0-360 degree,more easy and convenient.

Model	GW40	GW50
1. Bending round steel diameter	6-40mm	6-50mm
2.Grade thread screw steel diameter	6-32mm	6-42mm
3. Working plate diameter spec	320mm	320mm
4. Main shaft speed	8-15r/min	8-15r/min
5. Motor spec	3KW/380V	4KW/380V
6. Motor speed	1440t/min	1440t/min
7. Dimension	750× 700× 710mm	1060× 850× 730mm
8. Net weight/Gross weight	240kgs/260kgs	360kgs/380kgs
9. packing size	790× 790× 880mm	1100× 900× 900mm

portable rebar cutter tools

chinacoal11
http://www.chinacoalintl.com/
http://m.chinacoalintl.com/
http://china-machinary.com/
we provide service of enterprise's customs declaration, inspection.

Product Introduction

RC-16B

Max rebar：16MM
Min rebar：4MM
Certificate：CE ROHS

Portable electric rebar cutter is of light weight, small size, easy to carry, easy to operate, cutting process does not produce sparks, dust, no odor. Mainly used to cut steel bars used in construction, such as rebar. Round. Steel bars. Screws, etc.

Main Parameter

model	voltage (v)	no-load  power	cut  speed	cut dia (mm)	N.W (kg)	G.W  (kg)	machine  size(mm)	packing  size(mm)
RC-16B	18V	140W	4.0-5.0s	4-16	6.5	11.5	360x250x100	430x400x150
NRC-20	220V/110V	950W/1300W	3.0-3.5 s	4-20	12.5	17	500x130x140	575x280x165
RC-20	220V/110V	950W/1300W	3.0-3.5 s	4-20	12.5	17	410*115*220	480*195*280
RC-22	220V/110V	830W/900W	3.0-3.5 s	4-22	13	17.5	410x115x220	460x160x270
RC-25	220V/110V	1600W/1700W	3.5-4.5 s	4-25	24.5	29	480x150x255	565x230345
ORC-32	220V/110V	2200W	5 s	6-32	35	43	550*180*270	630*270*340