ZBL-P8100 Rebar Detector

chinacoal11
www.chinacoalintl.com
m.chinacoalintl.com
we provide service of enterprise's customs declaration, inspection.

ZBL-P8100 Rebar Detector, Rebar Detector, Concrete Rebar Detector

Product Introduction

ZBL-P8100 New design Foundation Pile Dynamic detector 

  (hereinafter called “Dynamic Tester”). It is a kind of digital and portable dynamic tester 

using the low strain reflected wave method to test the integrality of concrete pile.

Dynamic tester is mainly composed of the host, the receiving sensor, excitation equipment 

and fittings (including power adapter, signal wire).

Main Parameter

Item	Specifications
Noise voltage of the system (mV)	≤2
Dynamic range (dB)	³184
Amplifier frequency band (Hz)	1~10k
A/D resolution	24 bit A/D
Sampling time intervals	1ms~64000ms
Maximum length of sampling	³4096
Amplitude nonlinear degree	≤10%
Error of time indication	≤1%
Gain error	≤1 dB
Fixed point magnification	1,2,5,10,20,50,100
Number of channels	2
Item	Specifications
Phase position consistency of two channels	±3°or 0.05ms
Amplitude consistency of two channels	≤3% or ≤±0.2dB
Inter-channel interference	≤1%
Triggering mode	Signal Triggering
Acceleration transducer sensitivity (mV/g)	³100 mV/g
Frequency range of Acceleration transducer	0.5~9000 Hz
Continuous operating hours	>5 hrs
Power-supply mode	Rechargeable lithium battery inside; DC:+9V
Total weight(kg)	About 1.3
Total volume(mm)	210×149×60
Displayer	5.7 inch, TFT true color LCD
Operation Mode	Touch screen & Keys