SDD 6 Diesel Locomotive

chinacoal11
www.chinacoalintl.com
m.chinacoalintl.com
we provide service of enterprise's customs declaration, inspection.

SDD 6 diesel locomotive is developed and manufactured for Namibia and Angola as passenger, freight and shunting locomotive. It is equipped with Cummins QSK60-L1 diesel engine with maximum service power 1640kW. Main AC-DC transmission is employed with DC and AC transmission for auxiliary system. Two center-plate-less radial bogies with three axles for each and single pull rod for axle box are used. The mechanism of four low-position tractive rods is utilized for transmission of tractive and braking efforts. The car body is of load bearing centre beam and outside corridor. The braking system is equipped with double-purpose brake of air and vacuum. It is capable of 4 units in consist.

Basic locomotive parameters:
1. Purpose: passenger, freight and shunting locomotive
2. Applicable environment: operate normally in severe sand, dry, hot and desert areas
3. Gage: 1067mm
4. Transmission mode: AC-DC transmission
5. Axle arrangement: Co-Co
6. Wheel diameter: 914mm
7. Axle load: 16×(1±3%)t
8. Calculating locomotive weight with full service: 96×(1±3%)t
9. Maximum service power of the engine: 1640kW
10. Locomotive speed (calculated at half worn driving wheel as 880mm):
Maximum running speed: 120km /h
Continuous speed: 21.7km/h
11. Locomotive tractive effort at wheel rim (calculated at half worn driving wheel as 880mm):
Starting tractive effort: 313kN (starting current limit)/310kN (adhesion limit)
Continuous tractive effort: 200kN
12. Minimum curvature radius negotiated: 80m
13. Fuel tank capacity: 4000L
14. Oil volume: 281L
15. Water volume: 500kg
16. Sand volume: 300kg
17. Center line of coupler above rail head: 889mm±10mm
18. Locomotive length: 18100mm

Model	SDD 6
Purpose:	passenger, freight and shunting locomotive
Applicable environment	operate normally in severe sand, dry, hot and desert areas
Gage	1067mm
Transmission mode	AC-DC transmission
Axle arrangement	Co-Co
Wheel diameter	914mm
Axle load	16×(1±3%)t
Calculating locomotive weight with full service	96×(1±3%)t
Maximum service power of the engine	1640kW
Maximum running speed	120km /h
Continuous speed:	21.7km/h
Starting tractive effort	313kN (starting current limit)/310kN (adhesion limit)
Continuous tractive effort	200kN
Minimum curvature radius negotiated	80m
Fuel tank capacity	4000L
Oil volume	281L
Water volume	500kg
Sand volume	300kg
Center line of coupler above rail head	889mm±10mm
Locomotive length	18100mm